PO BOX 21, Refly Inc.,
Octyabrskaya nab. 6,
St. Petersburg, 193091,
Russia
Phone: +7 812 4450834
FAX:+7 812 4450834
The Pelican amphibian was designed by Russian homebuilders about 10 years ago. It is a twin engine amphibious flying boat. It has a fully enclosed cockpit that provides comfortable seating for three and superior visibility. The cabin is equipped with a full size instruments panel for basic flight and engine instruments. Two control sticks for left and right seats. Fuselage and wings are built of fiberglass. The amphibian has a retractable landing gear to permit take-off and landing from water and land. Owing to the successful aerodynamics and its twin (64 HP) engines this plane has excellent take-off and landing performances (50 meters from ground and about 25 meters from water), a rate of climb up to 8 m/sec, a cruising speed of 120..140 km/h and a very low stall speed. The range is up to 1500 km.
Length |
6.7 m |
22.62 ft |
Wing span |
11.5 m |
38.82 ft |
Height |
2.2 m |
7.43 ft |
Empty weight |
350 kg |
771.75 lb |
Gross weight |
800 kg |
1764 lb |
Useful load |
275 kg |
606.4 lb |
Number of seats |
3 |
|
Cockpit wide |
1.1 m |
3.71 ft |
Cockpit height |
1.2 m |
4.05 ft |
Fuel capacity |
100 L |
26.2 gal |
Take-off distance |
50 m |
169 ft |
Landing distance |
50 m |
169 ft |
Take-off speed |
70 km/h |
43 mph |
Top speed |
160 km/h |
98.5 mph |
Cruising speed |
140km/h |
86 mph |
Rate of climb |
8 m/sec |
1577 ft/min |
Stall speed |
65 km/h |
40 mph |
Range(std/AFT) |
540/1200km |
330/740m |
Engines used |
2 x Rotax 582 |
|
We produce two standard kits:
STANDARD KIT:
Kit #1 - Rudder
Kit #2 - Elevator
Kit #3 - Stabilizer
Kit #4 - Wing and flapperone
Kit #5 - Fuselage
Kit #6 - Controls
Kit #7 - Gears and Wheels
Kit #8 - Instruments
QUICK BUILD KIT
Kit #1 - Fuselage
Kit #2 - Wings
Kit #3 - Tail
Kit #4 - Gears and wheels
Kit #5 - Controls
Kit # 6 - Instruments
Kit #7 - Engine
Practice shows that total build time of STANDARD PELICAN KIT is about 1500
hours.
Pre-assembled parts of QUICK BUILD PELICAN KIT make it possible to reduce build
time to 170 hours.
Kit form |
USD |
STANDART KIT |
$10,000 |
QUICK BUILD KIT |
$18,000 |
Also KIT available gradually: |
|
WINGS KIT |
$5,200 |
FUSELAGE |
$6,300 |
TAIL |
$2,400 |
GEARS AND WHEELS KIT |
$3,000 |
CONTROLS KIT |
$1,100 |
INSTRUMENTS KIT |
$1,100 |
ENGINE MOUNT KIT: |
|
for ROTAX 582 |
$3,000 |
for ROTAX 912 |
$4,000 |
Assembly Manual |
$800 |
Last updated: 13/10/2000; Bernhard Stamm